번역 단일 구멍 알루미늄 베이스
원문 单孔铝底
번역 듀얼포트 알루미늄 베이스
원문 双孔 铝底
번역 단일 구멍 알루미늄 베이스 + 알루미늄합금 고속 기계바이스 머신바이스
원문 单孔铝底+铝合金快速平口钳
번역 듀얼포트 알루미늄 베이스 + 알루미늄합금 고속 기계바이스 머신바이스
원문 双孔铝底+铝合金快速平口钳
번역 단일 구멍 철 바닥 + 알루미늄합금 고속 기계바이스 머신바이스
원문 单孔铁底+铝合金快速平口钳
번역 듀얼포트 철 바닥 + 알루미늄합금 고속 기계바이스 머신바이스
원문 双孔铁底+铝合金快速平口钳
번역 NEW 까치발 + 알루미늄합금 고속 기계바이스 머신바이스
원문 新款支架+铝合金快速平口钳
Features:Used for fixed electric drills, no need to repeatedly invest in bench drills!Similar to Buddha beads, bead punching, this kind of hole requires more precise position for punching It is generally not recommended to use this bracket, because there will be a deviation of about 1-3mm.(The specific deviation has a lot to do with the concentricity of the used electric drill and the personal operating technique.)The electric drill has high concentricity and low vibration, which can reduce deviation.
Schematic diagram of electric drill to bench drill. The electric drill in the picture needs to be matched by yourself.
The hole of the bracket that fixes the electric drill, the diameter is between 38MM-43MM(Note: The position on the electric drill used to install the handle, the diameter is between 38mm-43MM, and the length reaches 20MM. Generally, it can be used. Not all electric drills can be equipped.). The diameter of the movable hole next to it is 35mm, which is usually a fixed electric grinder.
The difference between single hole and double hole: one more electric grinder hole that can rotate 360 ??degrees, which can be fixed properly
Electric grinder or electric drill,One machine with multiple functions as shown below:
2.5 inch flat nose pliers introduction Introduction of 3-inch flat-nose pliers
Electric drill stand and flat-nose pliers can be fixed together with screws. (Buy the bracket + flat-nose pliers package---the fixed screw will be given. As shown above:)